Juniper CP3 Rugged Android Smart Phone and Geode GNSS Antenna Combo

Description

The Geode Sub Meter GNSS Receiver from Juniper Systems is the ideal solution for those looking for affordable GPS and especially sub-meter accuracy.

Receiver

The Geode from Juniper Systems is a single frequency, single constellation receiver. This simple receiver design is for getting the job done, with unecessary no extra bells and whistles you do not need with the ability to upgrade to GLONASS and a higher update rate, the Geode has the ability to perfectly meet your needs.

Flexibility

The Juniper Geode Sub-Meter GNSS Receiver is the solution for quick and easy setup, flexibility and compatibility. The Geode is able to communicate over Bluetooth, and with an upgrade can have a Micro USB Port and a DB-9 port. Being compatible with multiple platforms, the Geode can run a Windows 10, Windows Mobile or Android device with the Geode. The Geode also works with 1/4″ x 20 camera studs and traditional surveying 5/8″ threads.

Juniper Rugged

The Juniper has the ability to work as long as you do. With the on-board 5300 mAh battery, you can expect around 10 hours of battery life from a Geode Sub Meter GNSS Receiver, and with Overtime Technology, you can work around the clock. And the Geode’s IP68 environmental rating means rugged! It will stand up to the dust and spray expected in a days’ work.

Key Features

• Sub-Meter Accuracy
• Real-Time Data
• All-In-One Design: Contains both Receiver and Antenna
• Open Interface

Ask our sales team today about the optional refresh rate, GLONASS and communication port upgrades today.

Juniper Cedar CP3

With the Juniper CP3 you can work hard and worry less- because it is the ultimate ruggidized, tough smartphone. With the Juniper CP3, you have the technology and the build quality to last you for years to come.

Juniper Rugged

The CP3 has an impressive IP68 water and dustproof IP68 environmental rating.  Even when fully submerged in water, you don’t have to worry about damaging it. And with 6000 mAh battery with 480 h of standby time, this smartphone always has more than enough battery power.

Specifications

Running Android 7.1.2 on a Qualcomm Snapdragon 653 Octa-core, the Cedar CP3 has more then enough processing power.  Paired with the 6 GB of RAM, the CP3 is the data collector that will get your job done. This is all supported by the internal 64 GB of storage and its expansive Mirco SD storage.

Connectivity

The Juniper CP3 is 4G capable smart phone. With an on-board short range radio, Wi-Fi and GPS GLONASS receiver, the CP3 has the tools to make any job easy.